favorite
favorite
hide
unhide
flag

Posted

print

Ship lap and tongue and groove boards - $6 (Powell, WY)

Ship lap and tongue and groove boards 1 thumbnailShip lap and tongue and groove boards 2 thumbnailShip lap and tongue and groove boards 3 thumbnailShip lap and tongue and groove boards 4 thumbnail
Tongue & Groove Pine

All blue stain tongue and groove is grooved on one side and flat/square on the other side (suitable for flooring). Ship lap is flat on both sides. All other boards are V groove one side and smaller nickle gap on other side.

Unfinished Tongue and Groove Pine
**Call to inquire about bulk discounts**
• 1x6 cabin grade, end matched, most 8 ft. $0.90 / lineal foot
• 1x6 standard grade, end matched, most 8 ft. $1.10 / lineal foot
• 1x8 cabin grade, end matched, most 8 ft. $1.22 / lineal foot
• 1x8 standard grade, end matched, most 8 ft. $1.49 / lineal foot
• 1x6 blue stain cabin grade, not end matched, 6ft long. $0.76 / lineal foot

Prefinished Tongue and Groove Pine
• 1x6 cabin grade, 8ft, $1.35 / lineal foot

Pine Trim
• 1x4, 8ft, $1.02 / lineal foot
• 1x4, 12ft, $1.02 / lineal foot
• 1x6, 12ft, $1.70 / lineal foot

Special Buys
**10% discount when buying a whole bunk of any special buy**
• 1x8 blue stain ship lap, not end matched, 6ft long, WP11 profile, face nailed. $0.70 / lineal foot
• 1x6 blue stain cabin grade, unfinished, not end matched, 6ft and 8ft lengths. Less blue than standard blue stain. $0.62 / lineal foot
• 1x8 blue stain cabin grade, unfinished, not end matched, 6ft to 16ft lengths. Less blue than standard blue stain. $0.78 / lineal foot
• 1x6 cabin grade, unfinished, not end matched, 6ft long, reversable (same V groove on both sides). $0.62 / lineal foot

Please call to verify inventory and to verify hours before making your trip. Leave a message if no answer and we will return your call.

Cash and checks accepted, no credit cards.

307-219-one48eight

Mountain View Mouldings
Located in Powell, Wyoming in the Big Horn Basin

To help with square foot to lineal foot conversion, the general math is to take sq ft needed X 2.4 to get linear feet needed for 1x6 T&G, or sq ft X 1.76 for 1x8 T&G.

post id: 7745525851

posted:

best of [?]

loading
reading
writing
saving
searching